SICK InspectorP61x, Operating Instructions Manual

Page: 34 / 76

“Ethernet” connection
1
4 3
2
Figure 22: M12 female connector, 4-pin, D-coded
Table 5: Pin assignment of the “Ethernet” connection
Pin Signal Function
1 TD+
2 RD+ R
3 TD– Sender–
4 RD– Receiver–
6.5 Connecting the device
6.5.1 Using the optional connection modules CDB and CDM
Connection on the device Connection modules Connection cable
Connecting cable with male connec‐
tor, M12, 17-pin, A-coded CDB650-204 Connecting cable
CDM420-0006
1)
Adapter cable
2)
1) CDM420-0007: for connecting 2 devices.
2)
Adapter cable (female connector, M12, 17-pin, A-coded / male connector, D-Sub-HD, 15-pin).
Connecting device via the CDB and CDM connection modules:
Connection modules Reference
CDB650-204 see "Connection of the device to CDB650-204", page 58
CDM420-0006 see "Connection of the device to CDM420-0006", page 66
NOTE
Connection module
For detailed information about mounting and electrical installation, please refer to
the operating instructions for the connection module in question. These are available
online at.
• www.sick.com/CDB
• www.sick.com/CDM
6.5.2 Connecting the supply voltage
Voltage source in accordance with ES1 and PS2 (EN 62368-1) or SELV and LPS
(EN 60950-1).
The power source for the device must be able to provide the following power outputs:
Table 6: Required supply voltage V
S
Supply voltage V
S
Power source: required power output
1)
DC 12 V ... 24 V ± 15% Maximum 16 W
1) For device with 3 loaded digital outputs (each 50 mA).
6
ELECTRICAL INSTALLATION
34 O P E R A T I N G I N S T R U C T I O N S | InspectorP61x 8026257//2020-12 | SICK
Subject to change without notice