SICK HTB18, Operating Instructions Manual

Page: 6 / 231

4 Operating and status indicators
2
3
2 3
4
1
1
Potentiometer adjustment (if
selected by model configuration) or
LED Indicators
2
LED indicator green: supply voltage
active (with IO Link, flashes when IO
Link Communication is active)
3
LED indicator yellow: status of
received light beam (with IO Link,
when teach mode is active)
4
Signal strength light bar (if selected
by model configuration)
5 Mounting
Mount the sensor using a suitable mounting bracket (see the SICK range of acces‐
sories).
NOTE
Note the sensor's maximum permissible tightening torque of 0.56 Nm.
Note the preferred orientation of the sensor relative to the direction of object motion,
refer to
figure 1 .
Figure 1: Sensor orientation relative to object direction
4
OPERATING AND STATUS INDICATORS
6
8017850.1A15 / 2020-12-14 | SICK
Subject to change without notice