Important information
FLOWSIC200 · Operating Instructions · 8013271/1CJ9/V2-0/2022-01 · © SICK Engineering GmbH
9
1.4
Data integrity
SICK Engineering GmbH uses standardized data interfaces, such as standard IP
technology, in its products. The focus here is on the availability of the products and their
properties.
SICK Engineering GmbH always assumes that the customer ensures the integrity and
confidentiality of data and rights affected in connection with the use of the products.
In all cases, the customer is responsible for the implementation of safety measures
suitable for the respective situation, e.g., network separation, firewalls, virus protection
and patch management.
1.5
Intended use
Purpose of the device
The FLOWSIC200 measuring system is used for non-contact measurement of flow velocity
and air temperature in traffic tunnels (road, railroad tunnels) or can be used in other tunnel
facilities.
Correct use
Only use the device as described in these Operating Instructions. The manufacturer
bears no responsibility for any other use.
Observe all measures necessary for conservation of value, e.g., for maintenance and
inspection and/or transport and storage.
Do not remove, add or modify any components to or on the device unless described and
specified in the official manufacturer information. Otherwise, the device could become
a hazard, any warranty of the manufacturer is void.
