Chapter
9
Operating Instructions
Flexi Classic Gateways
102
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
8011834/YT28/2016-03-15
Subject to change without notice
EtherNet/IP Gateway
If
Return Only Enabled Data
is activated, the length of Data set 6 is variable. This must be
taken into account when addressing the memory area in the PLC.
In order to use these settings temporarily do not check
Save in Flash
and click
Submit
.
In order to use these settings permanently, check
Save in Flash
and click
Submit
. The
configuration is then saved in the non-volatile memory of the UE410-EN and is still
available after the gateway has been restarted.
The current configuration of Data set 6 can be displayed by clicking
Display Set 6 Data
Format
. The following web page is displayed:
Return to the previous page by using the browser’s Back button.
9.6
Status of the interface to the PLC
The UE410-EN has its own web page that makes statistical data and diagnostics data of
the interface available to the user. On this page messages and responses from the PLC
and UE410-EN1 are counted and errors including error messages for diagnostic purposes
are displayed. The page is updated automatically every 10 seconds.
Click
PLC Interface Diagnostics
. The following web page is displayed:
Note