
„
This docume
nt is co
py
ri
ght!
Every duplication, utilization or
dissemination must be aut
horised by the SICK AG.
8015087/
1E
F
4
/2021-12-10
LF_07
page
12
von
12
Pin assignment:
N
S
sin
cos
D
A
0V
+24V
4...20mA
0 - 600
ȍ
measuring wire
1 2 3 4
N
S
64:1
sin
cos
μ
C
PSU
H
H
Supply
Output
Currentoutput
N
S
sin
cos
D
A
0V
+24V
0-10V
1 2
3 4
N
S
64:1
sin
cos
μ
C
PSU
H
H
Voltageoutput
measuring wire
Supply Output
R 10k
ȍ
L
Mating connector:
Concerning BCG 19 series included in delivery
x
cable socket, 5-poles, plastic interlocks, screw-type terminal connection
x
cable outlet 4 - 6 mm
Maintenance
The wire draw encoder is maintenance-free, while intended using. Depending on the application, a
complete reversal of 1 mill. can be reached. It depends on the use of the complete measuring range or
only parts of the measuring range. Further influence factors are the traversal speed, the acceleration as
well as environmental conditions.
The repair works should exclusively carried out by the manufacturer. An opening of the device leads to
expiring of the warranty claims.
Stocking
The wire draw encoder will be delivered well packed and can be stocked on a dry and covered
place.
Attention!
Moist stocking places should not be used. Please be sure that there is no condensation. The relative
humidity should favourably be below 65 %.
Further information
The wire draw encoder should only used to its corresponding purpose!
The wire draw encoder must be installed by trained personnel with knowledge of precision engineering!
Observe the professional Safety and Accident Prevention Regulations applicable to your country!
Please do not make or interrupt electrical connections to the device when the voltage is switched on!
A grounding is necessary to grant an undisturbed function at the coupled encoder!
Exceed or fall below of the operating temperature of the device has to be prevented!
Please avoid shock and vibration load!
Mounting and operating instructions
for wire draw systems
MRA-G 190 / BCG 19
5956Z02-BA:01
11/2015
SICK AG
Erwin-Sick-Str. 1, D-79181 Waldkirch
www.sick.com [email protected]