COMMISSIONING
6
45
8023732/2018-09-10|SICK
Subject to change without notice
O R I G I N A L O P E R A T I N G I N S T R U C T I O N S | AOS301-WWD
6.4
Adapting system parameters in TEMS Manager
6.4.1
Switching to editing mode
The standard parameters are adjusted to the measurement site in edit mode.
▸
Click on the
Edit location configuration
icon in the menu bar.
NOTE!
A user with the
Authorized user
or
Service
authorizations must be logged in to
switch (for more, see appendix at
▸
Work through the hierarchical structure of the navigation tree from top to bottom when
editing the system parameters.
NOTES ON LINKS
Do
not
change the
links
to other system functions that have been set up using the
chain-link icon
.
The toolbar above the navigation tree offers the following functions:
Symbol
Meaning
Load site configuration and start/edit it
•
Allows you to load a configuration file.
•
You can either start the configuration or open it in editing mode instead.
Start current site configuration
•
Starts the configuration that is currently open in editing mode.
•
A red number in the icon indicates that the configuration is erroneous.
Erroneous configurations cannot be started.
Symbols
