![background image](http://html.mh-extra.com/html/sick/1064114/1064114_operating-instructions-manual_1264282012.webp)
5
Mounting
5.1
Commissioning requirements
•
Computer with Internet access to download connection diagrams in the respective
ID sensor product documentation, accessible as a PDF on the ID sensor product
page on the web (visit
and enter the relevant product name in the
search).
•
Supply voltage:
and type label of the ID sensor to
be connected
•
Only perform mounting, connection, and configuration work within the ambient
temperature range of 0 °C to +50 °C!
•
Use within the ambient temperature range 0 °C to –40 °C only when at rest (no
mounting, connection, or configuration work).
5.2
Mounting the connection module
•
Can be mounted with the cover closed.
•
Unobstructed access to the internal
AUX
male connector is required at all times in
order to access the ID sensor via RS-232 (configuration and diagnostics)
•
Maximum length of cable between the connection module and ID sensor when
using the serial data interfaces: 10 m
•
Removable cover with connection diagram can be rotated 180° and locked in
parking position
1.
Hole and housing dimensions,
see "Dimensional drawing", page 23
, max. screw
diameter: 4 mm.
2.
For installation and commissioning of the optional CMC600, refer to the CMC600
operating instructions at
.
5
MOUNTING
12
O P E R A T I N G I N S T R U C T I O N S | CDB650
8021689/ZZN2/2021-05-07 | SICK
Subject to change without notice