3
11.0
FIXED CODE
DUPLICATING PROCEDURES
BEST POSITION FOR THE
DUPLICATION
licorice
black
cod. 4791010
magnolia
white
cod. 4791011
granade
red
cod. 4791012
sky
blue
cod. 4791013
IT IS RECOMMENDED:
TO REALIZE A CORRECT DUPLICATION OF THE REMOTE CONTROLS, WE RECOMMEND TO
FOLLOW THE PROCEDURES HERE BELOW TAKING CARE TO DISTANCE YOURSELF BY TOOL
THAT CAN GENERATE FREQUENCY TROUBLES AS:
CORDLESS
WI-FI VIDEO SURVEILLANCE DEVICES
MOBILE PHONES, SMARTPHONES OR TABLETS
WI-FI OR BLUETOOTH ACTIVED IN YOUR COMPUTERS
ELECTRONIC MOTOR
NEON LIGHTS
WIRLESS DEVICES FOR BACK END MANAGEMENT IN THE BUSINESS STORES
1-3 cm
1.
While pressing the button 1 of the “WHY EVO”, at the same time press 4 times the 2 button.
2.
Release both buttons. Now the WHY EVO RED LED emits a short flash every 2 seconds.
3.
Place the original remote control to be programmed in front of the “WHY EVO”, at about 1-3 cm of distance (as shown
in the picture).
4.
Press and retain pressed the button of the original remote control and wait for a change flash (as a faster flash) of
WHY EVO RED LED and a change of its color (GREEN) that confirms the correct learning of code. This step may take
a few seconds.
5.
While the GREEN LED is flashing, press the button of the “WHY EVO” where you want to program the code just learnt,
and retain pressed until the LED switches off. This step may take some seconds.
6.
The copy has been happened with success. Now check on the automation the correct functioning of the new WHY
EVO remote control.
Notes:
• If the RED LED flashes only 3 times and switches off, the code has not learnt correctly. Please repeat the operation
from the step 1.
• The WHY EVO memory is completely re-writable.
• To duplicate further buttons of WHY EVO, please repeat the operation from the step 1.
