7
11.0
WHY EVO WHY EVO
DUPLICATING PROCEDURES
1.
While pressing the button 1 of the “NEW WHY EVO”, at the same time press 4 times the 2 button.
2.
Release both buttons. Now the RED LED of “NEW WHY EVO” will emit a short flash every 2 seconds.
3.
Place the “SOURCE WHY EVO” in front of the “NEW WHY EVO”, at about 1-2 cm of distance (as in the picture 3 at the page 3).
4.
Press and retain pressed the button to be programmed of the “SOURCE WHY EVO”
NOW IF THE CODE IN THE “SOURCE WHY EVO”
Notes:
• If the LED flashes only 3 times and switches off, the code has not learnt correctly.
Please repeat the operation from the step 1.
• The WHY EVO memory is completely re-writable.
• To duplicate further buttons of WHY EVO, please repeat the operation from the step 1.
IS A FIXED
OR ROLLING-SIMPLE CODE
5a
wait for a change flash (as a faster flash) of “NEW
WHY EVO” RED LED and a change of its color (GREEN)
that confirms the correct learning of code. This
operation may take some seconds.
6a
While the GREEN LED is flashing, press the button of
the “NEW WHY EVO” where you want to program the
code just learnt, and retain pressed until the LED will
switch off.
7a
The copy has been happened with success. Now
check on the automation the correct functioning
of NEW WHY EVO remote control pressing directly
the button where the code has been programmed.
If it will not work, please proceed with the insertion
on the receiver of the NEW WHY EVO, through the
function, if it is present, or through
the
procedures given by the automation manufacturer.
IS A ROLLING-COMPLEX CODE
5b.
The WHY EVO RED LED will emit a short flash every
2 seconds. That it informs the user that, to duplicate
the remote control, it is necessary to emit the SEED
CODE to realize the copy.
6b.
Transmit now the SEED CODE of the “SOURCE WHY
EVO” pressing at the same time 1 and 2 buttons for 3
seconds till the switch on of RED LED. While the LED
is flashing, (within 10 seconds) pressing and retain
pressed the button where you want to program the
SEED CODE.
7b.
Now the RED LED of the “NEW WHY EVO” will change
the flash (more fast) and color (GREEN) to confirm
the correct learning of the code. This step may take
some seconds.
8b.
At this moment, press the NEW WHY EVO button
when you want to store the code and retain pressed
until the WHY EVO GREEN LED, switches off.
9b.
The copy has been happened with success. Now
check on the automation the correct functioning of
NEW WHY EVO remote control pressing directly the
button where the code has been programmed. If it
will not work, please proceed with the insertion on
the receiver of the NEW WHY EVO, through the
function, if it is present, or through the procedures
given by the automation manufacturer.
