8
SPECIAL PROCEDURES
11.0
TO MAINTAIN THE SAME SERIAL NUMBER OF A ROLLING REMOTE
1.
While pressing the button 2 of the WHY EVO, at the same time press 4 times the 2 button.
2.
Release both buttons. Now the RED LED “WHY EVO” will emit a short flash every 2 seconds.
3.
Place the original remote control to be programmed in front of the “WHY EVO”, at about 1-3 cm of distance (as shown
in the picture at the page 3).
4.
Press and retain pressed the button of the original remote control and wait for a change flash (as a faster flash) of
WHY EVO RED LED and a change of its color (GREEN).
5.
Choice the button where you want to program the freqeucny and press it. This step may take some seconds.
6.
The copy has been happened.
7.
Activate now the correct procedure for the copied model and insert the new remote control on the receiver (see the
compatibility list present in this manual).
8.
Repeat this procedure for the other buttons, if necessary.
PROGRAM A ROLLING CODE ON EACH BUTTON WITH A SERIAL NUMBER
1.
While pressing the button 4 of the WHY EVO, at the same time press 4 times the 1 button.
2.
Release both buttons. Now the RED LED “WHY EVO” will emit a short flash every 2 seconds.
3.
Place the original remote control to be programmed in front of the “WHY EVO”, at about 1-3 cm of distance (as shown
in the picture at the page 3).
4.
Press and retain pressed the button of the original remote control and wait for a change flash (as a faster flash) of
WHY EVO RED LED and a change of its color (GREEN).
5.
Choice the button where you want to program the freqeucny and press it. This step may take some seconds.
6.
The copy has been happened.
7.
Activate now the correct procedure for the copied model and insert the new remote control on the receiver (see the
compatibility list present in this manual).
