7
© Copyright Siborg Systems Inc.
Economy mode. The display shows the battery voltage and
the firmware version. *
3.
If you place the device on a flat surface with the screen down,
after 3 beeps the device will
automatically turn off. *
*Function can be enabled/disabled
through the device menu:
System/Power
The device is powered by a Li-Po battery with 3.7 V rated
voltage. The battery icon on the display shows the remaining
charge of the battery. This icon will
bl
ink when the device’s power is
below 3.6 V and will automatically
turn off at 3.5 V. Information about the battery voltage can be
displayed by selecting:
System/Power/Battery Voltage
Charge the battery by connecting it via a micro-USB cable
to a USB DC voltage source of 5V +/- 5%. The device screen is lit
when the device is charging, and it turns off when the charging is
complete.
The main menu is shown when the joystick is pressed. The main
menu is multi-levelled. Select the appropriate menu item by
moving the joystick up or down and pressing down to select.
To set the default operating mode (R-L-C-D, RDC+LED, Voltage,
etc.), press and hold the joystick for two beeps. This mode is
then stored in the device memory and will be activated when the
device is powered on next time.
Summary of Contents for LCR-Reader MPA
Page 1: ......
