21
© Copyright Siborg Systems Inc.
implementation of any circuit based on this product is the sole
responsibility of the customer.
Manufacturer does not warrant any damage that occurs as a result of the
user’s circuit or any defects that result from user
-supplied products. This
warranty does not apply to repairs or replacements necessitated by any
cause beyond the control of factory including, but not limited to,
operation contrary to furnished instructions, shipping accidents,
modification or repair by the user, neglect, accidents or other Acts of God.
The foregoing is in lieu of all other expressed warranties and the
Manufacturer does not assume or authorize any party to assume for it any
obligation or liability. The duration of any warranties that may be implied
by law (including the warranties of merchantability and fitness) is limited
to the term of this warranty. In no event shall the Manufacturer be liable
for special, incidental or consequential damages arising from ownership or
use of this product, or for any delay in the performance of its obligations
under this warranty due to causes beyond its control. This warranty is
limited in duration to one (1) year from the date of original purchase.
This warranty is in lieu of all other warranties, expressed or implied,
including any implied warranty of merchantability or fitness for a
particular use. The remedies provided herein are buyer’s sole and
exclusive remedies. Neither Manufacturer, nor any of its employees shall
be liable for any direct, indirect, special, incidental or consequential
damages arising out of the use of its devices and software even if
Manufacturer has been advised in advance of the possibility of such
damages. Such excluded damages shall include but are not limited to:
costs of removal and installation, losses sustained as the result of injury to
any person, or damage to property.
The limits of the absolute error are given as ± (% of the measured value +
the number of LSB digits) at 23ºC ± 5ºC, humidity less than 80% and 15
minutes of operation.
R-L-C
Measurement Parameters
C+R, L+R, R, C+D, C+ESR, L+Q,
Z+θ
Measuring Time
0.25 s, 0.5 s, 1.0 s, 2.0 s
Test Signal
Generator
Frequency
100,120 Hz,1, 10, 20, 30, 40, 50, 60, 75, 100 kHz
Voltage
1.0, 0.5, 0.1 Vrms
Source Resistance
100
Ω
Resistance
(R)
Range
10 m
Ω
to 20 M
Ω
Maximum Resolution
0.0001
Ω
Capacitance
(C)
Range
0.1 pF to 1 F
Maximum Resolution
0.001
р
F
Inductance
(L)
Range
10 nH to 100 H
Maximum Resolution
0.1 nH
Quality Factor (Q)
0.001 to 1000
Loss Tangent (D)
0.001 to 1000
Loss Angle
(θ)
-90 to 90°
LED/Diode
Maximum Voltage Test
3.2 V
Voltage Measurement Accuracy
±(3%+5) V
Maximum Test Current
16 mA
Current Measurement Accuracy
±(3%+5) А
Voltage
Range
- 15 V to 15 V
Summary of Contents for LCR-Reader MPA
Page 1: ......
