© Copyright Siborg Systems Inc.
20
9.1 General care of the device
•
Do not expose the device to water, it is not waterproof.
•
Do not expose the display for a long period of time to direct sunlight.
•
Use a soft cloth dampened with water to clean the outside surface and
cleaning the LCD display.
•
Do not use liquid solvents or detergents.
If there is an unexpected measurement result, check the quality of the
contact between the test leads of the device probes and the element
being examined. Make sure you make the measurements correctly. Carry
out the instrument diagnostics. Independent dismantling of the case,
replacement of individual elements and circuits are not allowed. For a
repair, please contact the manufacturer directly.
•
Temperature and humidity during storage: -10 ° C to 50 ° C with relative
humidity <80%.
•
There should be no dust, acid and alkali vapours in the storage room.
•
Recharge the built-in battery once every 6 months.
All modes of transportation at ambient temperatures from -40 ° C to + 50 °
С
. The device must be protected against precipitation and dust.
Manufacturer warrants this product to be free from defects in materials
and workmanship for a period of one (1) year from the shipment date.
Manufacturer warrants the following items for ninety (90) days from the
date of shipment: rechargeable batteries, disks and documentation.
During the warranty period, the Manufacturer will, at its discretion, either
repair or replace any product that proves to be defective. To exercise this
warranty, write or call your local distributor. You will be given prompt
assistance and return instructions. Please send the product with shipping
prepaid to the indicated service facility. Repairs will be made and the
product will be returned to you. Repaired or replaced products are
warranted for the balance of the original warranty period, or ninety (90)
days from the date of the repair.
This warranty does not cover the repair of any product whose serial
number has been altered, defaced or removed. This warranty does not
cover finishes (scratches on surface or screen), normal wear and tear, nor
does it cover damage resulting from misuse, dirt, liquids, proximity or
exposure of heat, accident, abuse, neglect, misapplication, operation
outside of the environmental specifications, tampering, unreasonable use,
service performed or attempted by unauthorized service centers, failure
to provide reasonable and necessary maintenance.
This warranty does not apply to defects resulting from product
modification without Manufacturer’s express written consent, or misuse
of any product or part. This warranty also does not apply to software, non-
rechargeable batteries, damage from battery leakage, and improper
polarity of the batteries or problems arising from normal tear and wear or
failure to follow instructions. This warranty does not cover LCD damage,
physical damage to the Joystick; electrical damage of the product due to
high voltage / charged capacitor or improper battery type. The design and
Summary of Contents for LCR-Reader MPA
Page 1: ......
