©
2020 Siborg Systems Inc
Page 3
Detailed layout of the clickable parameters is shown below.
5. Buttons on the screen:
1.
RLCD
: Turns on RLCD regime for measuring LCR and Diodes using AC
2.
RD
: DC measurement regime for C, R Diodes and LEDs
3.
U
: AC/DC Voltage regime
4.
Brightness
: turns on / off the backlight of the LCR-Reader-MPA-BT device screen.
5.
Hold:
Enables/disables Hold mode.
6.
Sound:
Turns on/off the sound.
7.
Default:
Restores Default Settings.
8.
Connect/Auto:
Automatic or Manual BT connection.
9.
Clickable areas
: As shown above Primary Parameter, Secondary Parameter, Test
Frequency, Test Signal Level, and Circuit Mode open setting menus
