-
47
-
When the Battery Voltage Has Dropped to 21 V or Less During Operation by BU-24B/BU-24L (Sold
Separately)
Power Supply Fault
Stop Setting
ON Timer Selection
Delay Time / Start Time
ON(Default setting)
The power voltage fault is displayed and pump operation is discontinued.
OFF
Pump operation is continued even if the battery voltage drops.
There is the risk that the BU-24B/BU-24L might overdischarge. So, when
the pump is being driven by the BU-24B/BU-24L, set the power supply
fault stop setting to ON.
During Sampling
Processing When a Power Failure Occurs During Pump Operation by AC Power
Power Supply
Fault Stop
Setting
OFF Timer Selction
Manual Run
Time
Stop
Time
Total
Volume
ON
After a
recovery from
a power
failure, the
power voltage
fault is
displayed and
pump
operation is
discontinued.
All
data
before the
power failure
occurred will
be
lost
.
After a
recovery from
a power
failure, the
power voltage
fault is
displayed and
pump
operation is
discontinued.
Data before
the power
failure
occurred will
be
saved
.
After a recovery from a
power failure, the power
voltage fault is displayed
and pump operation is
discontinued.
Data before the power
failure occurred will be
saved
.
After a recovery
from a power
failure, the
power voltage
fault is
displayed and
pump operation
is discontinued.
All
data before
the power
failure occurred
will be
lost
.
*
When the ON timer is set to "Manual," after a recovery from a power
failure, the power voltage fault is displayed and pump operation is
discontinued. Also,
all
data before the power failure occurred will be
lost
.
OFF
(Default setting)
After a
recovery from
a power
failure, pump
operation is
continued.
However,
all
data before
the power
failure
occurred will
be
lost
.
After a
recovery from
a power
failure, pump
operation is
continued until
the remaining
sampling time
reaches 0
(zero). Also,
the data
before the
power failure
occurred will
be
saved
.
When the power failure
is recovered before the
sampling stop time,
pump operation is
continued.
When the power failure
is recovered after the
sampling stop time has
been exceeded, an OFF
timer setting error is
displayed and pump
operation is
discontinued.
In both cases, the data
before the power failure
occurred will be
saved
.
After a recovery
from a power
failure, pump
operation is
continued until
the total flow
rate reaches
the set value.
However,
all
data before the
power failure
occurred will be
lost
.
*
When the ON timer is set to "Manual," after a recovery from a power
failure, the pump returns to the sampling start state and sampling is
repeated from the beginning. Also,
all
data before the power failure
occurred will be
lost
.
If a power failure occurs during sampling with a data logger memory
error still displayed, all measurement data before the power failure
occurred will be lost after a recovery from a power failure regardless of
the power supply fault stop setting. Also, the preset flow rate is
displayed without the power voltage fault being displayed.
