-
18
-
6 Basic
Operations
This chapter describes the basic operations for running this pump. For detailed operations, or
functions not described in this chapter, see the following chapters.
(1) Turn the [POWER] switch key to the ON
position. When the power is turned ON, the
version is displayed, followed by the main
screen as shown on the right. In this state,
press the [MENU/ESCAPE] key.
(2) The main menu is displayed. Press the
［
UP
］
Key and the
［
DOWN
］
key.
At this item, press the
［
ENTER
］
key.
(3) The Setup sub-menu is displayed as shown
on the right.
6.1 Suction Flow Rate Setting
(1) Press the [UP] and [DOWN] keys to select "1 Set Flow Rate," and press the
[ENTER] key.
(2) The current suction flow rate setting is
displayed highlighted as shown in the figure
on the right. Press the [UP] and
[DOWN] keys to increment/decrement the set
value in 0.1 L/min units. When the desired
setting value is set, be sure to press the
[ENTER] key. The newly set value is
entered, and the screen returns to the Setup
sub-menu.
After setting a new value, if the [MENU/ESCAPE] key is pressed before
the [ENTER] key is pressed, the screen will return to the Setup
sub-menu without the newly entered value being accepted.
S e t u p
S e t
F l o w
R a t e
L / m i n
A c t u a l
V F
3 0.0
1 L a s t
D a t a
2 C u r r e n t
D a t a
3
S e t u p
4 P r e v i o
u s
D a t a
5 C l e a r
L o g s
6 T e s t
7 C a l i b r a t i o n
S e t u p
1
S e t
F l o w
R a t e
2 S e t
O N
T i m e
3 S e t
O F F
T i m e
4 S e t
D a t e
&
T i m e
5 S e l e c t
T i m e r
6 S e t
F l o w
U n i t
7 S e t
F a u l t
S t o p
S e t u p
S e t
F l o w
R a t e
L / m i n
A c t u a l
V F
3 0.0
