Sibata DAS-100, Operation Manual

Page: 8 / 20

- 8 -
•
The product is a sampling device that uses a passive sampler. Do not use it for any
purpose not indicated in this manual. Doing so could cause a malfunction.
•
Do not wash the product directly in water. Doing so could result in malfunction.
•
Do not place anything on top of the product. Doing so could cause the product falling
down, deformation, malfunction or accident.
•
Remove the battery before cleaning or inspecting the product. Not doing so could cause
an injury or malfunction.
•
Remove the battery when the product is not in use. Not doing so could cause a
malfunction.
•
If not using the product for an extended period, remove the battery and store it at normal
room temperature in a dry location away from direct sunlight. Not doing so could cause
a malfunction or other problems.
•
Never attempt to connect to the battery case with wire or other metal objects, or any
other method not specified in this manual. Doing so could cause a malfunction.
•
Do not permit water, other liquids, or non-atmospheric gases to enter the product. Also,
do not permit salt air or other corrosive gases or chemicals to enter the product, either.
Doing so could cause a malfunction or fire.
•
Do not insert screws or other foreign objects into product gaps. Doing so could cause a
malfunction. If a foreign object accidentally enters the product, immediately stop the
measurement, remove the battery, and contact your Sibata representative or the store
where you purchased the product.
•
The normal operating temperature range of this product is 5 to 35
°
C, with humidity
between 20 and 75 % RH (and no condensation). Operating the product outside these
temperature and humidity ranges could reduce performance, shorten the service life, or
cause a malfunction.
•
Keep the product away from sources of noise. Also, do not place it in areas with strong
magnetic fields, high dust levels, or high humidity. Doing so could cause product
damage or other problems.
•
Be sure to operate the product using a new AA alkaline battery. The fan and LED
functions may not be coordinated properly if the battery is depleted.
•
Hold the battery case when removing the battery cap to remove or install the battery.
Removing the battery cap while holding other areas of the main unit could cause the
removal of parts unnecessary for battery replacement.