- 10 -
3 Type of Battery Used and Sampler
Operation
To ensure the product functions properly, use a new AA alkaline battery each time the
product is used. The fan and LED functions may not be properly coordinated if the
battery is depleted.
The product's LED indicator is for confirming the product function when a new alkaline
battery is installed. It may not be possible to properly confirm sampler functionality if a
partially used battery is installed or after the sampler has been operated for 24 hours.
Confirm both that the fan rotates and that the LED illuminates when the product is
operating.
Hold the battery case when removing the battery cap to remove or install the battery.
Removing the battery cap while holding areas other than the battery case could cause
the removal of parts unnecessary for battery replacement.
4 Names
of
Parts
Exterior of Semi-Active Sampler
Sample intake port cap
Holder
Extension
Fan motor
(and exhaust port)
Battery cap
Tripod mount
Battery case
LED indicator
Hanger rings
Summary of Contents for DAS-100
Page 2: ......
