Sibata DAS-100, Operation Manual

Page: 7 / 20

- 7 -
•
Do not apply chemicals to the product. Doing so could cause a malfunction or fire.
•
This product is not designed to be explosion-proof. Do not operate the product near
highly flammable or combustible items. Doing so could cause explosion or fire.
•
Keep the product away from open flames. Do not burn the product in a fire. Doing so
could cause explosion or fire.
•
This product is not designed to be water-proof. Do not get water or other liquids on the
product. Doing so could cause a malfunction or fire.
•
Do not subject the product to strong impacts or drops. Doing so could cause a
malfunction or accident.
•
Never attempt to disassemble or modify the product. Doing so could cause a
malfunction or accident.
•
If a problem occurs during operation, immediately stop operating the product, and
remove the cause. If it is determined that the product caused the problem, remove the
battery and then contact your Sibata representative or the store where you purchased
the product. Never operate the product if it is not functioning normally. Also, never allow
anyone other than a qualified service engineer to disassemble or modify the product.
Doing so could cause a malfunction or accident.
•
Use a new AA alkaline battery. Using any other battery not only could prevent the
product from functioning properly, it could also cause an accident, malfunction, electric
shock, or fire.
•
Do not touch the product with wet hands. Doing so could cause a malfunction.