manualshive.com logo in svg

Sibata 080130-1200, Operation Manual

The Sibata 080130-1200 Operation Manual is a comprehensive guide that provides step-by-step instructions on how to effectively operate and maintain the product. This manual is available for free download on our website, manualshive.com, ensuring easy access to valuable information for all users.

Share
Download
background image

- 13 -

Be careful of the shuttle tube orientation. If it is attached upside down, the urethane 

holder inside might fall, and there is a risk that the glass will break. 

Attaching the Shuttle Tube 

Mount a ferrule gasket on the shuttle tube. Then attach the shuttle tube on the flow meter 
suction port, and fasten it with a clamp. 
Place a ferrule gasket on the shuttle tube. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Loosen the hopper fixing screws. Remove the hopper from the top stage fixing block. Place 
the hopper above the shuttle tube and fasten it with a clamp. 
At this point, ensure that the hopper is fitted into the hopper top stage guides. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Ferrule gasket 

Summary of Contents for 080130-1200

















































Reviews:

No comments

Related manuals for 080130-1200

Brands by name

Popular brands

Load more brands