manualshive.com logo in svg

Sibata 080130-1200, Operation Manual

The Sibata 080130-1200 Operation Manual is a comprehensive guide that provides step-by-step instructions on how to effectively operate and maintain the product. This manual is available for free download on our website, manualshive.com, ensuring easy access to valuable information for all users.

Share
Download
background image

- 18 -

Sampling Method 

Setting the Flow Rate   

Touch the numerical region of the flow rate settings 
directly to proceed to the flow rate setting screen, 
where the flow rate can be set. 
 
 
 
 
 
 
 
In the flow rate setting screen, press the numerical 
keys to enter the desired flow rate. 
Press 

  to confirm the numerical value and 

return to the main screen. 
Press    ESC    to cancel entry and return to the 
main screen. 
Press    CLR    to set the numerical value to "0." 
Press    BS    to delete the last figure entered. 
 
 
 
 
 

The configurable flow rate range is 100 L/min 

to 1200 L/min

 

Summary of Contents for 080130-1200

















































Reviews:

No comments

Related manuals for 080130-1200

1010music Bitbox 3.0 User Manual preview
Bitbox 3.0
Brand: 1010music Pages: 72

Brands by name

Popular brands

Load more brands