manualshive.com logo in svg

Sibata 080040-710, Operation Manual

The Sibata 080040-710 Operation Manual is available for download, absolutely free! This comprehensive manual offers detailed instructions on how to use your Sibata 080040-710 product effectively. Simply visit manualshive.com to download your copy and ensure you get the most out of your device.

Share
Download
background image

 

-

 

41

 

- 

 

Ambient BP. (Ambient Pressure Sensor Calibration)

 

Prepare a standard "ambient pressure 
gauge." 
The ambient pressure measurement port 
is built in the cooling air exhaust port on 
the left side of the sampler unit. 

When "2 Ambient BP." is selected and the 
[ENTER] key is pressed, the current ambient 
pressure is displayed with the adjustment 
value of the previous calibration reset. 
After matching the ambient pressure display to the readout value on the standard 
pressure gauge by pressing the [UP] and [DOWN] keys, press the [ENTER] key. 
Calibration input is accepted, and the screen returns to the Calibration menu.   

 

* 

After setting the numerical value, if the [MENU/ESCAPE] key is pressed before the 

[ENTER] key is pressed, the screen will return to the Calibration menu without the 
newly entered value being accepted.

 

* 

The ambient pressure displayed here is displayed with the adjustment value of the 

previous calibration reset. For this reason, the ambient pressure may differ from the 
ambient pressure value displayed outside of the Calibration menu. Perform error 
measurement for the ambient pressure measurement value in a different menu after 
calibration.

 

* Calibrate the ambient pressure sensor before measuring the suction flow rate 

error. 

If the ambient pressure sensor is calibrated after the suction flow rate error is 

measured, the instantaneous and total flow rate measurement values will be affected 
by the ambient pressure measurement error.

 

 

 

Pressure Drop (Filter Pressure Loss Sensor Calibration)

 

Prepare a "standard pressure gauge" that is capable of measuring negative pressure 
(gauge pressure) to a range of 0 to -50 kPa. 

Also prepare a hose joint (optionally available) for attachment to the suction port, and 
a manual vacuum pump (optionally available) for creating suction.

 

Attach a hose joint to the suction port. As shown in the figure, use the T-shaped 
adapter and tube to attach a hose joint, standard pressure gauge, and manual vacuum 
pump. Set the plug valve inside the sampler to the closed position.   

 
 
 

C a l i b r a t i o n
A m b i e n t

B P .

A d j .

A m b i e n t

B P .

h P a

3

1 0 1

Ｐ

Manual 

vacuum pump 

Standard 

pressure gauge 

Hose joint 

Summary of Contents for 080040-710































































Reviews:

No comments

Related manuals for 080040-710

Brands by name

Popular brands

Load more brands