siat SM44 HS, Instruction Manual And Spare Parts List

Page: 31 / 84

February 2016 31
ENGLISH
9-OPERATION
PARAMETERS
DESCRIPTION
UNIT OF
MEASURE
Origin research speed vertical axis AXIS HOME SEARCH SPEED (FIRST PHASE)
mm/’
Origin offset moving speed vert. axis
SENSOR HOME SEARCH OFFSET SPEED (SECOND PHASE)
mm/’
Manual speed
MANUAL AXIS SPEED
mm/’
Vertical position range SAME BOX ACCEPTANCE VALUE (VERTICAL) mm
Horizontal position range
SAME BOX ACCEPTANCE VALUE (HORIZONTAL)
mm
Positioning offset to axis
TAPING HEAD OFFSET (DIFFERENCE BETWEEN READ AND
POSITIONING VALUES)
mm
Timeout full line FULL LINE START DELAY FROM PHOTOCELL COVERAGE Sec
Initial speed on box research
AXIS 1 FIRST PHASE SPEED (BOX SEARCH)
mm/’
Low speed on box research
AXIS 1 SECOND PHASE SPEED (PROBE SLOWING)
mm/’
Go up TI vert. speed AXIS 1 RETURN TO HOME SPEED (AFTER MEASURING)
mm/’
Max value at height speed
SPEED CHANGE HEIGHT (MAX -> MIN)
mm
Min value of box research
MIN BOX HEIGHT (ALARM TRIGGERED WITHOUT BOX)
mm
Speed TO SM44 positioning AXIS 2 POSITIONING SPEED (TAPING HEAD)
mm/’
Go up TO vert speed
AXIS 2 RETURN TO HOME SPEED
mm/’
Taper alarm exclusion
END AND BROKEN TAPE ALARM BIT EXCLUSION
0-1
Reference box height REFERENCE BOX HEIGHT FOR AXIS 1 CALIBRATION mm
Max height TI AS24
MAXIMUM AXIS 1 HEIGHT (CALIBRATED HEIGHT)
mm
Max height TO SM44 AXIS 2 CALIBRATION HEIGHT (TAPING HEAD) mm
Min weight TI AS24 MINIMUM AXIS 3 WIDTH (HORIZONTAL READER) mm
Max weight TO SM44
MAXIMUM AXIS 3 WIDTH (HORIZONTAL READER)
mm