7
SECTION 2 INSTALLATION
2.0 Fuses (PLEASE READ BEFORE INSTALLING)
Always ensure the correct fuse is fitted and connections are as per diagrams below to prevent
damage to the pump that could void warranty.
Always ensure the correct fuse is fitted and connections are as per diagrams below to prevent
damage to the pump that could void warranty.
Motor
Wattage
FUSE REQUIRED
12 Volt
24 Volt
High Efficiency
150
100 (IEC)
NA
NA
7.5 amp
5 amp
Standard
40
60
90
120
150
5 amp
10 amp
15 amp
20 amp
25 amp
2.5 amp
5 amp
7.5 amp
10 amp
12.5 amp
For other wattage motors, or where no motor is supplied with the pump, please consult Solar
Injection Australia to ensure correct fuse.
If the motor is being driven directly via an SIAT71500 Timer/Controller the maximum fuse rating
is 10 amp.
Note: Drive case is limited to maximum input of 22 Nm, maximum of 150 Watts at 60 rpm. For
loads above this, our Heavy Duty Drive should be used.