11
Select Mode
1. Depress the ‘+’ & ‘-’ buttons until ‘Mode Select’
appears on the screen.
2. Depress “Select” button and cycle to required
mode.
3. Depress “Select” again to select.
4. Depress the “Back”button to return to the
“Start Timer” screen and start controller as per
step 2.
OPERATION (cont.)
Show Current Settings
1. Depress the ‘+’ & ‘-’ buttons until ‘Show Settings’
appears on the screen.
2. Depress “Select” button to cycle through settings.
3. Depress “Back” to exit.
4
5
Set Units
1. Ensure the controller has power on and the display shows as per on
the previous page.
2. Depress the ‘+’ twice or until the display shows ‘OPTIONS’ and then depress the ‘Select’ button.
3. Depress the ‘+’ or ‘-’ buttons until the display shows ‘UNITS’ and then depress the ‘Select’ button.
4. Use the ‘+’ or ‘-’ buttons to choose either ‘Metric LPH’ or ‘US GPH’ and then depress the ‘Select’ button.
5. From here you can either depress the ‘Back’ button until the display shows as per to start the controller
or you can go on to set other parameters such as ‘PUMP SIZE’; FLOW RATE’; or ‘MODE SELECT’.
1
1
6
Set Pump Size
1. Ensure the controller has power on and the display shows as per on the previous page.
2. Depress the ‘+’ twice or until the display shows ‘OPTIONS’ and then depress the ‘Select’ button.
3. Depress the ‘+’ or ‘-’ buttons until the display shows ‘PUMP SIZE’ and then depress the ‘Select’ button.
4. Use the ‘+’ or ‘-’ buttons to get to the correct pump size (e.g ‘L150 1 1/2” ’)and then depress the ‘Select’
button.
5. From here you can either depress the ‘Back’ button until the display shows as per to start the controller
or you can go on to set other parameters such as ‘UNITS’; FLOW RATE’ or ‘MODE SELECT’.
1
1
Set Flow Rate
1. Ensure the controller has power on and the display shows as per on the previous page.
2. Depress the ‘+’ twice or until the display shows ‘OPTIONS’ and then depress the ‘Select’ button.
3. Depress the ‘+’ or ‘-’ buttons until the display shows ‘FLOW RATE...’ and then depress the ‘Select’ button.
4.
Use the ‘+’ or ‘-’ buttons to set your desired flow rate (in LPH or GPH depending on the UNITS selected
previously), and then depress the ‘Select’ button.
5. From here you can either depress the ‘Back’ button until the display shows as per to start the controller or
you can go on to set other parameters such as ‘UNITS’; PUMP SIZE’ or ‘MODE SELECT’.
7
8
1
1
SIAT75001 SiA Smart Controller
Revision: TH1