19
Adjusting the limits in User mode
To change the lower limit
Send the shade to it’s current lower limit.
my
my
Press both and at the same time
until the shade jogs. Adjust to a new lower
limit position.
Press until shade jogs.
my
To change the upper limit
Send the shade to it’s current upper limit.
my
my
Press both and at the same time
until the shade jogs. Adjust to a new lower
limit position.
Press until shade jogs.
my
Adding or deleting a Transmitter or a Channel
Programmed Transmitter
Step 1:
Using already programmed transmitters select the transmitter (single channel)
or the channel, (1- 5) of a multi-channel transmitter.
Step 2:
Press and hold the programming button of that transmitter until the shade jogs.
Transmitter to add or delete
Step 3:
Select the transmitter (single channel) or the channel, (1-5) of a multi-channel
transmitter, to be added or deleted.
Step 4:
Press and hold the programming button of that transmitter until the shade jogs.
Setting an Intermediate Position (Preferred Position)
Setting
Press the or to operate shade. At the
desired intermediate (preferred) position press
(Stop) to stop the shade.
Once the desired Intermediate position is
reached, Press and hold (stop) until the shade
jogs. The intermediate position is now added to
memory.
my
my
my
my
my
my
Note
- Shade should be stationary prior to
activating intermediate position function.
- If shade is actively moving (in - motion)
Should be pressed twice.
To Delete:
Activate shade to intermediate position,
then press and hold (stop) for 5
seconds. Shade will jog to confirm
deletion.
Using
Send the shade to the intermediate position by
pressing (stop) from ANY shade position.
