2
3
Cat5e
(run to Control System/ Switch location)
PRE-WIRING - 110v / 220v AC - Pigtail Power
PRE-WIRING - DCT Control - Cat 5e/ UTP
NEUTRAL
110V White
220V Blue
HOT
GROUND
110V Black
220V Brown
110V Green
220V Green and White
1. Make sure an appropriate junction box or power receptacle is located within 5ft of the
installation location.
2. Wire in the pigtail power cable at the junction box per electrical code standards.
1. Make sure your UTP/Cat5e cable is within 100 ft (30m) of your 3rd party Control Systems/
Wall Swtich.
2. If your 3rd party Control/ Wall Switch is more than 100ft, you must used a shielded
UTP/ Cat5e cable .
Installer must follow all
local electrical codes when
connecting AC line voltage
power.
For more details on Control
refer page 17
Screen
Front Closure
Fascia
PARTS IN THE BOX - EXTERNAL - 110v / 220v AC
L Brackets
* Wood Screws
(2 pair) Gloves
IR Remote
IR Eye
(2) 3.5 mm Male
Trigger connectors
Wall Switch
Cable
DCT Wall switch
and cover plate
12’ IEC Cable
(if selected)
Idler Retraction
Tool
* NOTE: Screws are provided to mount to wooden structural supports only. If other substrate is
present then installer must provide appropriate fasteners.
