SI 5 Motorized, Owner'S Manual

Page: 15 / 17

24 25
3RD PARTY CONTROL SYSTEMS
Low Voltage Trigger (LVT)
Tip DC +3V to +12V
50mA min
Sleeve
24 Gauge or Larger. 750ft (228 m) Max. supplied
Shielded 2 Conductor wiring
by installer. Plugs must be rated for 50 mA min.
Recommend all connections be soldered.
A low voltage trigger ouput from a projector or a controls system is a simple robust way to
control your screen. Simply connect the low voltage trigger output from porjector or control
sytem to the input on the case as shown below. The screen will move to it’s lower limit whenever
3-12 V DC is applied to the low voltage trigger port. When the voltage drops to zero the screen
will return to it’s upper limit.
ADJUSTING THE SCREEN TENSION
Click.
Click.
Click.
Click.
1
2
Press in the button and turn knob counter clockwise untill the string is loose.
Turn the knob clockwise 2 to 4 clicks at a time untill there is tension on the string. The
strings should have minimal tension on them only.
DO NOT OVERTIGHTEN TAB TENSION STRINGS: Tab tension strings will NOT flatten out
major wrinkles in the screen. Overtightening the tab tension strings can result in damage to
your screen material.
3RD PARTY CONTROL SYSTEMS
IR Hex Codes
0000 006c 0000 000c 0006 011b 0006 011b 0006 00bb 0006 00bb 0006
00bb 0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 011b
0006 08a4
0000 006c 0000 000c 0006 011b 0006 011b 0006 00bb 0006 00bb 0006
00bb 0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 011b 0006 011b
0006 08a4
0000 006c 0000 000c 0006 011b 0006 011b 0006 00bb 0006 00bb 0006
00bb 0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 011b 0006 00bb
0006 08a4
Use a 3rd party universal remote to control the screen via the IR eye. SI recommends using a
learning remote to learn the codes from the included IR remote. However, the IR HEX codes can
be used to manually program them into your universal remote or 3rd party control system.