Si-tex SAS-300 Operation Manual Download Page 65

Page: 65 / 104

$background image$

- 58 -

Advanced Menu

4. Others

4.1. Recording

This is the function of recording current screen.

Marked [

●

REC] in red color on the upper right on the data bar during recording.

Note: The recording file is stored in SD card.

(*The storage location is “E9\Recording\” in SD card).

(* Recording time is different by the size of the memory card)

4.2. Recording List

Available to display and delete the recording file

4.3. Screen capture

This is the function of save the current screen

Note: The capture file is stored in external SD card.

(*The storage location is “E9\Capture\” in SD card).

(* Recording time is different by the size of the memory card)

4.4. Capture List

Available to display and delete the capture file

4.5. [FUNC] key:

Set the function frequently used for your convenience.

(

☞

The default setting is Page.)

[FUNC]KEY SETUP

1.Page

2.Active

3.Recording

4.Capture

5. MOB

6. GOTO

Summary of Contents for SAS-300









































































































Search results

Summary of Contents for SAS-300

Reviews:

Related manuals for SAS-300

Brands by name

Popular brands

Si-tex SAS-300, Operation Manual

Search results

Summary of Contents for SAS-300

Reviews:

Related manuals for SAS-300

Brands by name

Popular brands