—
21
—
“VHF operation” option, and press to select the “Priority 2nd Ch”, then press and select your preferred channel by
“Up/Down” key and confirm it.
CALL/MENU
Short press to enter “DSC Menu”, long press to enter “Main Menu” (detailed operation please see 3. Main Menu
Operation on Screen)
Back Light
Short press to switch the Back Light On and Off. Short Press ‘Backlight’ key the light will keep turning on. Press it
again, it’ll turn off. If the backlight setting is off, press any key will turn on the backlight except the PTT key. The backlight
should be remaining for 5 seconds if no any keys pressed. The time out will be reset if any key pressed within the time
frame.
CH/*/WX (
WX Channel:Only available for USA,Canada
)
A short press of “CH/*/WX” key will trigger Private channel if there are private channels in memory. Pressing the
“Up/Down” key will change private channel selection.
A long press of “CH/*/WX” key will enter WX mode in USA or CAN Band. Pressing “Up/Down” key will change
WX channel. The “WX” icon will be displayed on the screen.
Weather Alert Operation: (USA and CAN Band only)
When in the Weather mode, a long press the “CH/*/WX” key will switch on the Weather Alert function. Toggling the
Weather Alert function ON/OFF. The icon “WAT” will be displayed accordingly, When Weather Alert function is enabled,
every 4 seconds the last used weather channel will be checked for weather alert tone when the radio is tuned to working
channel. With Weather Alert Function enabled, once the alert tone is detected, the “Weather Alarm” will be display and
alarm sounds. After silencing the weather alarm, the radio will automatically tune to the current WX channel where the
weather alert has been detected. The alert will be detected in the modes of Dual/Tri-watch, Scan operation etc.
6.Other Features and Solutions
Special function keys
First Power on,Then Press and hold “PTT” key and CH/*/WX+CALL/Menu Key,
you can enter the up grade mode directly. LCD display as below:
First Power on,Then Press and hold “PTT” key and SCAN+DW/FOG Key, later you
can enter the writing channel mode directly. LCD display as below:
The software’s
Upgrading by PC
Please wait----
The Private
Channels are
Cloning by PC
Please wait---
