—
19
—
TRIW/HAIL (Tri Watch/Hailer)
Short press “TRIW/HAIL” key can activate the TRI WATCH mode. Monitor CH16, current channel and one
programmed channels in cycle.
Long press “TRIW/HAIL” and enter “HAILER LISTEN MODE” for setup as you wish. Sounds received through the
horn can be heard through the radio speaker. Press and hold the PTT key and speak your announcement. Release the PTT
key to listen.
Squelch/MOB Key
Short press “SQL/MOB” key and “SQL” icon will be shown on LCD, then press Up/Down key or rotate “POWER”
key to toggle as you wish.
Long press “SQL/MOB” key will display this “please press 3 seconds Distress key to send MOB distress call" on VHF,
then Press Distress for 3 seconds, Distress call with nature MOB is sent.
MOB mark is outputted via NMEA. A MOB mark is immediately sent to the chart plotter to have a position as accurate
as possible.
DW/ FOG (Dual Watch/Foghorn)
At the normal mode, short press “DW/FOG” key to activate the DUAL WATCH mode. Monitor the current channel
and Ch 16 in cycle. Whenever weather alert is activated, the WX Alert channel will be monitored once every 4 seconds.
Long press “DW/FOG” key and enter “Foghorn Menu”, then select preferred item from list. Sounds received through
the horn can be heard through the radio speaker. Press PTT key on the microphone or handset to sound the horn. The horn
will stop when you release the PTT key.
MEM Key
Enter /Exit the memory mode:
Short press MEM key to enter the memory mode, the memory channel will be marked and “M” icon show on the right
side next to channel number. At the left side of the current channel will mark a “MEM “icon which means already entered
the user memory mode.
At the Memory mode, short press the MEM key to exit the memory mode. The “M” icon and “MEM” icon will
disappear.
Adding/Deleting memory CH:
1. At the normal mode, use the “UP/DOWN” key to select desired channel for programming.
2. Long press the MEM key to store up the channel as memory channel.
3. “M” icon will be shown on LCD to indicate the current CH has been saved in the memory.
4. No limitation for saving memory channels.
5. For USA, International, and Canadian Frequency can be saved separately.
6. At the normal mode, use the “UP/DOWN” key to select the memory channel to be deleted.
7. Long press the “MEM” key to delete the selected channel from the memory mode.
Scan Key
