—
14
—
CPA Alarm enable Choose
“
Disable
”
or
“
Enable
”
item to enter disable or enable AIS alarm, then press
“ENTER” key to confirm.
CPA Range (Closest point of approach) Alarm distance setup
Press UP/DOWN key to input digital one by one, after you have done this, press “ENTER” key to confirm, the maximum
input range is 25.0NM, if the input value over than 25.0NM, than this operation is invalid, the system will ask for re-enter,
the default CPA value is 1.5 NM.
TCPA (Time closest point of approach)Alarm distance setup
Press UP/DOWN key to input digital one by one, after you have done this, press “ENTER” key to confirm, the maximum
input range is 30 minutes, if the input value is over than 30 minutes, the input is invalid, then the system will ask for re-enter,
the default CPA value is 10:00 Min.
ATIS Operation
Long press the CALL/MENU key to enter “ATIS Operation” for setup.
Main Menu
VHF Operation
GPS Setup
AIS Output
ATIS Operation
DSC Operation
System Config
EXIT
▲
▼
ENTER
ATIS Operation
My ATIS ID
ATIS Function
EXIT
▲
▼
ENTER
CPA Range
Input Range
0
1.5NM
EXIT
▲
▼
ENTER
TCPA Time
Input Time
1
0:00Min
EXIT
▲
▼
ENTER
