Page
All Rights Reserved Shyam Telecom Limited
42/43
Next Generation
Signal Enhancement
FCC Statement:
FCC ID:S3CDB6MR20
This device complies with Part 2, 22,24 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received, including
interference that may cause undesired operation.
IC Statement:
Trade Name: SHYAM Dual Band Inddor Repeater
Model No.: DB6MR20
IC: 5751A-DB6MR20
This device complies with RSS-131, RSS-102 of the IC Rules.
Warning
Changes of modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipments.
Antenna Information:
This device has been designed to operate with the antennas listed below, and having a maximum
gain of 12dBi. Antennas not included in this list or having a gain greater than 16dB are strictly
prohibited for use with this device. The required antenna impedance is 50 ohms.
Antenna (or equivalent) list:
1) Donor Antenna , max. 12 dbi for UPLINK path
2) Server Antenna, max. 9 dbi for DOWNLINK path
To reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for
successful communication.
WARNING!
This equipment complies with FCC & IC radiation exposure
limits set forth for an uncontrolled environment. This transmitter must not
be co-located or operating in conjunction with any other antenna or transmitter. For
mobile or fixed location transmitters, the minimum separation distance is greater than 20
cm (indoor server antenna), even if calculations that the MPE distance would be less.
