Page
All Rights Reserved Shyam Telecom Limited
15/43
Next Generation
Signal Enhancement
Figure 4: Log-in Repeater
II) Configuration
Configuration means setting different repeater parameters for proper
operation. Configuration of Shyam repeaters can be performed locally with
a laptop / PC connected to the repeater by means of local USB serial
interface cable.
Clicking the
CONFIGURE
on the command bar, displays configuration
window. This window allows access to all the configurable repeater
parameters.
!
SET: This is for updating the repeater parameters.
!
READ: This is for reading configured parameters from repeater.
Repeater ID (Figure 5)
User can assign a unique repeater ID to each repeater installed. Up to 10
characters are allowed for this field.
Repeater Location (Figure 5)
User can assign the address of location where repeater is installed. Up to
30 characters are allowed for this field.
UP Link/ DL Frequency (Figure 6)
The UL /DL frequency ranges are defined for all the equipped sub bands
(Maximum up to six) depending on the bands being used.
