- 28 -
F
Jumpers
FSB Speed Auto Configuration Setting (JP1)
MV17 provides jumper JP1 to set configuration front side bus at 66MHz,
100MHz, and 133MHz. Inserting mini-jumper caps on JP1 pin 5-6, pin 7-8 to
identify automatically the FSB speed.
Set CPU host clock
hard-configuration to Auto.
(default)
When FSB auto config. is default, the user may still adjust CPU Host clock
on each FSB from Frequency/Voltage Control of BIOS Setup program.
For experienced users, MV17 mainboard provides an alternative hardware
configuration function to adjust front side bus manually. Before you adjust
FSB frequency by jumper, You need to remove all jumper cap from JP1 pin
5-6 and pin 7-8, following the steps outlined below:
Set CPU host-clock
hard-configuration to 66MHz.
Set CPU host-clock
hard-configuration to 100MHz.
Set CPU host-clock
hard-configuration to 133MHz.
1-
2
3-
4
5-
6
7-
8
A1
1-
2
3-
4
5-
6
7-
8
1-
2
3-
4
5-
6
7-
8
1-
2
3-
4
5-
6
7-
8
1-
2
3-
4
5-
6
7-
8
JP1
