- 13 -
Figure 3-7
Connectors
Front Panel Connectors (JP10)
Speaker Connector - SPKER
PC speaker connector may attach a 4-pin PC speaker cable from the case to this connector.
HDD LED Connector - HDD-LED
Attach a 2-pin IDE drive LED cable to this connector. The LED lights when an IDE
device is active.
ATX Power On/Off Switch Connector - PW-ON
Attach a 2-pin momentary type switch to this connector for turning on or off your ATX
power supply.
Hardware Reset Connector - RESET
Attach 2-pin hardware reset switch to it. Closing the reset switch causes the system to restart.
PW-LED Connector - PWR-LED
Attach 3-pin Power-LED connector cable from the housing front panel to PW-LED header
on the mainboard. The power LED stays lights while the system is running.
EPMI Connector - EPMI
Hardware System Management Interface connector may attach a 2-pin momentary switch
to it. When push it will force system get into power saving mode, and the system will
resume when switch is pushed again.
Green LED Connector - GLED
Attach a 2-pin Green LED cable to it. The Green LED lights when the system get into
power saving mode. The Green LED off when the system resume back to normal mode.
