- 25 -
Drive A type / Drive B type
This item specifies the types of floppy disk drive A or drive B that has been installed
in the system.
Video
This item selects the type of adapter used for the primary system monitor that must
matches your video display card and monitor. Although secondary monitors are
supported, you do not have to select the type in Setup.
Halt On
This item determines if the system will stop, when an error is detected during power
up.
Memory
This item is display-only. It is automatically detected by POST (Power On Self Test)
of the BIOS.
Base Memory
The POST of the BIOS will determine the amount of base (or conventional)
memory installed in the system. The value of the base memory is typically 512K
for systems with 512K memory installed on the mainboard, or 640K for systems
with 640K or more memory installed on the mainboard.
Extended Memory
The BIOS determines how much extended memory is present during the POST.
This is the amount of memory located above 1MB in the CPU's memory address
map.
