- 41 -
UART Mode Select
The main board support IrDA(HPSIR) and Amplitudes Shift Keyed IR(ASKIR)
infrared through COM 2 port. This item specifies onboard Infra Red mode to
IrDA
1.0, ASKIR, MIR 0.57M, MIR 1.15M, FIR
or
Standard (Disabled).
Note : FIR is not available currently.
RxD , TxD Active
This item specifies the Active level for RxD & TxD signal.
IR Transmittion delay
This item enable/disable the delay of the IR state change from Rx to Tx mode or Tx
to Rx mode.
Onboard Parallel Port
This item specifies onboard parallel port address to
378H, 278H, 3BCH
or
Disabled.
Parallel Port Mode
This item specifies onboard parallel port mode. The options are
SPP
(Standard
Parallel Port),
EPP
(Enhanced Parallel Port),
ECP
(Extended Capabilities Port), and
EPP+ECP.
ECP Mode Use DMA
This item specifies
DMA
(Direct Memory Access) channel when ECP device is in
use. The options are
DMA 1
and
DMA 3
.
This item will not show up when SPP and
EPP printer mode is selected.
EPP Mode Select
This item select the EPP Mode, EPP 1.9 or EPP 1.7.
