- 64 -
USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have USB peripherals.
"
The choice: Enabled or Disabled.
USB Keyboard Support
Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have a USB keyboard.
"
The choice: Enabled or Disabled.
Init Display First
This item allows you to decide to activate whether PCI Slot or on-chip
VGA first.
"
The choice: PCI Slot or Onboard .
AC97 Audio
This item allows you to decide to enable/disable the 810 chipset family
to support AC97 Audio/Modem.
"
The choice: Auto or Disabled.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or mul-
tiple sector read/write. If your IDE hard drive supports block mode
(most new drives do), select Enabled for automatic detection of the
optimal number of block read/write per sector the drive can support.
"
The choice: Enabled or Disabled
Onboard FDC Controller
This item specifices onboard floppy disk drive controller. This setting
allows you to connect your floppy disk drives to the onboard floppy
connector. Choose the "Disabled" settings if you have a separate
control card.
"
The choice: Enabled Disabled.
Onboard Serial Port1
This item is used to define onboard serial port 1
"
The choice: 3E8/IRQ4, 2E8/IRQ3, 3F8/IRQ4, 2F8/IRQ3,Auto, or
Disabled.
