- 33 -
#$
#$
#$
#$
#$
Other Connectors
ATX Power Supply Connector (JWR1)
Locate the 20-pin male header ATX power connector (JWR1) on your
mainboard. Plug the power cable from the ATX power supply unit directly
into JWR1 ATX power supply connector.
Note 1:
The ATX power connector is directional and will not go in unless the
guides match perfectly making sure that pin#1 is properly positioned.
Note 2:
Make sure the latch of the ATX power connector clicks into place to
ensure a solid attachment.
Note 3:
Your ATX power supply must be supplied to ACPI +5V standby power
and at least 720mA compatible.
Note 4:
Make sure your power supply have enough power for higher speed
processor installed.
Cooling Fan Connector for CPU FAN (J66)
The mainboard provides one onboard 12V cooling fan power connector to
support CPU FAN (J66).
Note:
Both cable wiring and type of plug may vary depending on the fan maker.
Keep in mind that the red wire should always be connected to the +12V
header, and the black wire, to the ground (GND) header.
SENSE
GND
+12V
E1
E2
JWR1
1
J66