- 37 -
CPU, Chipset and Chassis Fan connectors - FAN1/2
The mainboard provides three onboard 12V cooling fan power connectors
to support CPU (FAN1), System (FAN2) cooling fans.
Note:
Both cable wiring and type of plug may vary
, which depends on the fan maker. Keep in
mind that the red wire should always be
connected to the +12V header and the black
wire to the ground (GND) header.
E2
E3
SENSE
GND
+12V
1
Wake-On-Modem Connector (WOM1)
If you have installed a modem, use the cable provided with the modem to
plug into the mainboard WOM1 connector. This enables the Wake On
Modem(WOM) feature. When your system is in a power-saving mode, any
modem signal automatically resumes the system. You must enable this item
using the Power Management page of the Setup Utility. See Chapter 3 for
more information.
WOM1
FA
N
1
FA
N
2
