Shuttle MVP Elite Plus Assembly Manual Download Page 14 | Manualshive

Page: 14 / 19

background image

Page 14

STEP 9

ATTACHING THE TOWERS

ITEMS
REQUIRED

TOWERS

TOWERS BAG

1. Unwrap and remove hardware from the Towers, as well as loosening the bottom bolt on the

Towers.

2. Place both Towers (one on each side) on the plastic blocks at the Head-End Stand. (Pic

9.2)

3. Secure the Towers to the Wings with the hardware originally attached to the Towers. Secure

the base of the Towers by tightening the bottom bolt. (Pic 9.3)

4. Attach the PNF Pulley from the Towers Bag to the desired height.

5. Feed the rope through both Pulleys. (Pic 9.5)

6. Locate the Rope Cleat on both sides of the Carriage and secure the end of the Rope by

pushing it down and back into the Rope Cleat. (Pic 9.6)

Pictures are on the next page

«
...
12
13
14
15
16
...
»

Summary of Contents for MVP Elite Plus




















Reviews:

No comments

Related manuals for MVP Elite Plus

Brand: Modulate Pages: 2

Brand: Dairyland Pages: 21

Brand: Gainsborough Pages: 2

Brand: Gainsborough Pages: 2

Brand: Gait up Pages: 12

Brand: Gait up Pages: 6

Brand: Gaiam Pages: 2

Brand: Hanna Instruments Pages: 2

Brand: Hanna Instruments Pages: 2

Brand: Hanna Pages: 12

Brand: Hanil Pages: 24

Brand: Hanil Pages: 32

Brand: Hanil Pages: 24

Brand: Wahl Pages: 2

Brand: P-Q Controls Pages: 5

Brand: P+L Systems Pages: 2

Brand: UEi Pages: 5

Brand: UGO BASILE Pages: 47

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands