- 38 -
3.3 System Memory Configuration
The MV43V/MV43VN mainboard has two 184-pin DIMM slots that allow
you to install from 64MB up to 2GB of system memory.
Each 184-pin DIMM (Dual In-line Memory Module) slot can accommodate
64MB, 128MB, 256MB, 512MB, and 1GB of PC1600/PC2100 compliant
2.5V single or double side DDR SDRAM modules. DIMM slots are arranged
in two banks, each memory bank made of one bank and providing a 64-bit
wide data path.
Install Memory:
Install memory in any or all of the slots and in any combination shown as
follows.
DDR SDRAM
Note
: The total installed memory does not exceed 2GB.
Note: You do not need to set any jumper to configure memory since the
BIOS utility can detect the system memory automatically. You can
check the total system memory value in the BIOS Standard CMOS
Setup menu.
Upgrade Memory:
You can easily upgrade the system memory by inserting additional DRAM
modules in available DIMM slots. The total system memory is calculated by
simply adding up the memory in all DIMM slots. After upgrade, the new
system memory value will automatically be computed and displayed in the
field " Standard CMOS Setup" of BIOS setup program.
DIMM Slot
Memory Modules
Module
Quantity
D
DR
1
64MB, 128MB, 256M
B, 512MB and
1GB
184-pin
2.5
V
D
DR SDRAM DIMM
x 1
D
DR
2
64MB, 128MB, 256M
B, 512MB and
1GB
184-pin
2.5
V
D
DR SDRAM DIMM
x 1