manualshive.com logo in svg

Shuttle MV43V, User Manual

Share
Download
Shuttle MV43V User Manual Download Page 41

- 37 -

Audio CD_IN Headers (CD2)

Use the audio cable provided with the CD-ROM/DVD drive to connect to the
mainboard CD-in connector CD2.

Pins Assignment:(CD2)

1=CD IN L
2=GND
3=GND
4=CD IN R

Front-Panel Microphone and Line_out Header (PANEL1)

This header allows users to install auxiliary front-oriented microphone and line-
out ports for easier access. Either the Mic and Line_out connector on back-
panel or Panel1 header are available at the same time. If you would like to use
this Panel1 header on front-panel, please remove all jumpers from PANEL1
and install your special Extra Mic / Line_out cable instead.

Pins Assignment:

1=MIC In              2=GND
3=VCCMIC          4=+5V Audio
5=Line Out(R)      6=Line Out(R)
7=NC                    8=Empty
9=Line Out(L)       10=Line Out(L)

E5

E4

Two mini jumpers
must be setted on
pin5-6 and pin9-10
when the header is
not used.

1 3 5 7 9

  2   4   6   8 10

1

PA

N

E

L1

CD2

1

1

2

3

4

Summary of Contents for MV43V






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands