- 42 -
3.3 System Memory Configuration
The MB48/N or MB50/N mainboard has two 184-pin DIMM slots that allow
you to install from 128MB up to 2GB of system memory.
Each 184-pin DIMM (Dual In-line Memory Module) slot can accommdate
128MB, 256MB, 512MB, and 1GB of PC1600/PC2100 (MB48/N), or of
PC1600/PC2100/PC2700 (MB50/N) compliant 2.5V single or double side
64-bit wide data path DDR SDRAM modules.
1. Install Memory:
Install memory in any or all of the banks. The combination shown as follows.
Note: The total installed memory does not exceed 2 GB.
Note: The total installed memory does not exceed 2 GB.
Note: The total installed memory does not exceed 2 GB.
Note: The total installed memory does not exceed 2 GB.
Note: The total installed memory does not exceed 2 GB.
Note:
Note:
Note:
Note:
Note: You do not need to set any jumper to configure memory since the
BIOS utility can detect the system memory automatically. You can
check the total system memory value in the BIOS Standard CMOS
Setup menu.
2. Upgrade Memory:
You can easily upgrade the system memory by inserting additional DDR
SDRAM modules in available DIMM banks. The total system memory is
calculated by simply adding up the memory in all DIMM banks After up-
grade, the new system memory value will automatically be computed and
displayed in the field "Standard CMOS Setup" of BIOS setup program.
DIMM
Socket
Memory Modules
Module
Qua ntity
DIMM 1
128MB, 256MB, 512MB and 1GB184-pin 2.5V
DDR SDRAM DIMM
x 1
DIMM 2
128MB, 256MB, 512MB and 1GB184-pin 2.5V
DDR SDRAM DIMM
x 1
