- 36 -
E1
!
!
!
!
!
Other Connectors
ATX Power Supply Connectors (JP11 & CN2)
This motherboard uses 20-pin Pentium 4 standard ATX power header
(ATXPWR, JP11), and comes with the other one (ATX12V, CN2) header.
Please make sure you plug each in the right direction.
A traditional ATX system remains in the power-off stage when AC power re-
sumes from power failure. However, it is inconvenient for a network server or
workstation if there is not an UPS to execute power-on. Thus, this motherboard
supports an AC Power Auto Recovery function to solve this problem. You may
enable the function, "PWRON After PWR-Fail," in the sub-menu of "Power
Management Setup" within the BIOS setup program.
Note 1:
Note 1:
Note 1:
Note 1:
Note 1:
The ATX power connector is directional and will not go in
unless the guides match perfectly, making sure that pin#1 is
properly positioned.
Note 2:
Note 2:
Note 2:
Note 2:
Note 2:
Make sure the latch of the ATX power connector clicks into
place to ensure a solid attachment.
Note 3:
Note 3:
Note 3:
Note 3:
Note 3:
Your ATX power supply must be supplied to ACPI+5V stand-
by power and at least 720mA compatible.
Note 4:
Note 4:
Note 4:
Note 4:
Note 4:
Make sure your power supply have enough power for higher
speed processor installed.
ATXPWR
ATX12V
JP11
CN2
AT
X
12
V
C
N
2
