- 12 -
Back Panel Connectors
Figure 2-9
Figure 2-8
COM1/COM2 Connectors
Attach COM1/COM2 device cable to this connector.
PS/2 Keyboard & PS/2 Mouse Connector
Two 6-pin female PS/2 keyboard & Mouse Connectors is located at the rear of the main board.
PS/2 Mouse on top of connector and PS/2 Keyboard on the bottom of connector. Plug the PS/2
keyboard and mouse jack into this connector.
Parallel Port Connector
A 25-pin female connector is located at the rear of the main board.
Plug the parallel port device cable into this connector.
USB1/USB2 Port Connectors
Two female connectors are located at the rear of the board. Plug
the USB devices jack into this connector.
Other Connectors
ATX Power Supply Connector - J4
It is a twenty-pin male header connector. Plug the connector from
the power directly onto the board connector while making sure the
pin 1 is in its position. The main board requires a power supply
with at least 200 watts and power good signal.
IR Connector - J3
Infrared device connector may attach a 5-pin infrared device cable
to this connector for enabling the infrared transfer function.
This mainboard meets the specification of ASKIR and HPSIR.
Figure 2-10 shows J3's pin assignment.
Figure 2-7
