- 13 -
CPU, Chassis & AGP cooling Fan
connectors - JP1, JP4,J12 & J9
The main board provides three onboard 12V cooling
fan power connectors. Depending on the fan maker,
the wiring and plug may be different. The red wire
should be connected to +12V and black wire should
be connected to ground (GND).
Wake-On-LAN Connector - J14
Attach a 3-pin connector from the LAN card which
supports the Wake-On-LAN (WOL) function. This
function lets users wake up the connected system
through the LAN card.
Enhanced IDE and Floppy
connectors
The main board shipped with two 40-pin ribbon cable
for IDE H.D.D , one 34-pin ribbon cable for F.D.D
Ribbon cables should always be connected with the red
stripe on the Pin 1 side of the connector.
SB-Link connector - JP9
The main board provides a 2x3 pin SB-Link header
accepts the Creative CT4600 series PCI sound cards with
PCI solution to connect the legacy Sound Blaster com-
patible audio to the PCI bus.
Figure 2-10
