Shuttle HOT-591 User Manual Download Page 40 | Manualshive

Page: 40 / 42

background image

39

IDE Primary Slave PIO

In these items, there are five modes defined in manual mode and one automatic mode.
There are 0, 1, 2, 3, 4, and AUTO is the default settings for on board Primary Slave
PIO timing.

IDE Secondary Master PIO

In these items, there are five modes defined in manual mode and one automatic mode.
There are 0, 1, 2, 3, 4, and AUTO is the default settings for on board Secondary Master
IDE PIO timing.

IDE Secondary Slave PIO

In these items, there are five modes defined in manual mode and one automatic mode.
There are 0, 1, 2, 3, 4, and AUTO is the default settings for on board Secondary Slave
IDE PIO timing.

IDE Primary Master UDMA

On this mainboard, VIA chipset improves IDE transfer rate using Bus Master
UltraDMA/33 IDE which can handle data transfer up to 33MB/sec. The options are
Disabled and Auto, and Auto is the default settings for on board Primary Master
UltraDMA33.

IDE Primary Slave UDMA

On this mainboard, VIA chipset improves IDE transfer rate using Bus Master
UltraDMA/33 IDE which can handle data transfer up to 33MB/sec. The options are
Disabled and Auto, and Auto is the default settings for on board Primary Slave
UltraDMA33.

IDE Secondary Master UDMA

On this mainboard, VIA chipset improves IDE transfer rate using Bus Master
UltraDMA/33 IDE which can handle data transfer up to 33MB/sec. The options are
Disabled and Auto, and Auto is the default settings for on board Secondary Master
UltraDMA33.

IDE Secondary Slave UDMA

On this mainboard, VIA chipset improves IDE transfer rate using Bus Master
UltraDMA/33 IDE which can handle data transfer up to 33MB/sec. The options are
Disabled and Auto, and Auto is the default settings for on board Secondary Slave
UltraDMA33.

Onboard FDC Controller

This item specifies onboard floppy disk drive controller. This setting allows you to
connect your floppy disk drives to the onboard floppy connector. Choose the

“Disabled”

settings if you have a separate control card.

Onboard Serial Port 1/2

This item is used to define onboard serial port 1/Port2 to

3F8/IRQ4, 2F8/IRQ3, 3E8/

IRQ4, 2E8/IRQ3, Auto

or

Disabled.

IR Address Select

This item is used to define onboard serial port 1/Port2 to 3F8/IRQ4, 2F8/IRQ3, 3E8/
IRQ4, 2E8/IRQ3, Auto or Disabled.

«
...
38
39
40
41
42
»

Summary of Contents for HOT-591











































Reviews:

No comments

Related manuals for HOT-591

NF796M-H310 Series

Brand: JETWAY Pages: 63

Brand: Acrosser Technology Pages: 7

STM32 Nucleo-32

Brand: ST Pages: 37

Brand: Texas Instruments Pages: 21

Brand: Texas Instruments Pages: 24

Brand: Gigabyte Pages: 80

Brand: Mini-Itx Pages: 174

Brand: MINN KOTA Pages: 16

Brand: NXP Semiconductors Pages: 40

Brand: EPOX Pages: 55

Brand: Atmel Pages: 74

Brand: Foxconn Pages: 106

Brand: DFI Pages: 64

Brand: DFI Pages: 76

Brand: DFI Pages: 136

Brand: Biostar Pages: 45

Brand: Acer Pages: 23

Brand: Acer Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands