17
AT Power Supply Connectors - J2
It is a twelve-pin male header connector. Plug the connector from the power directly onto the
board connector while making sure the pin 1 is in its position. The main board requires a power
supply with at least 200 watts and "power good signal.
IR Connector - JP3
Infrared device connector may attach a 5-pin infrared device cable to this connector for enabling
the infrared transfer function. This mainboard meets the specification of ASKIR and HPSIR.
CPU, Chassis(or AGP) cooling Fan connectors - Fan1 & 2
The main board provides three onboard 12V cooling fan power connectors for CPU (Fan 2),
AGP device (Fan 1) cooling fan. Depending on the fan maker, the wiring and plug may be
different. The red wire should be connected to +12V and black wire should be connected to
ground (GND)
Wake-On-LAN Connectors - J12
Attach a 3-pin connector from the LAN card which supports the Wake-On-LAN (WOL) func-
tion. This function lets users wake up the connected system through the LAN card.
(
Note: Recently, only Intel LAN card support Wake-On-LAN function
)
Figure 2-8: FAN 1, FAN 2 & WOL (J12)
